Precautions for Hand Oil Pump

Precautions for Hand Oil Pump

Applicable Oil Types

This pump is only suitable for diesel oil,engine oil and lubricating oil.Do not use it for gasoline,alcohol,corrosive liquids,strong acid,strong alkali or water,which will damage the pump body and sealing parts.

Pipeline Connection

Make sure the inlet and outlet hoses are tightly connected without air leakage or oil leakage.Install a filter at the bottom of the suction pipe to prevent impurities from entering the pump.Do not over-tighten the threads to avoid damage.

Operation Specification

Shake the handle at a uniform and steady speed.Violent or rapid shaking is forbidden,as it will cause internal damage and unstable oil output.Avoid long-time continuous overloading operation.

Suction Height Limit

Do not exceed the maximum suction height of the pump.Excessively high suction distance will cause air lock and failure to absorb oil.Keep oil pipelines unbent and uncrushed.

Storage Environment

Avoid long-term exposure to sunlight,rain and damp surroundings to prevent rust and aging.Drain residual oil inside the pump after use and keep it clean and dry.

Safety Protection

Keep the pump away from open flames and high-temperature heat sources.Keep the working area clean to avoid oil slipping hazards.Do not operate in flammable and explosive environments.

Daily Maintenance

Regularly check hoses,sealing rings and connectors for aging or damage.Replace worn parts in time.Clean the pump cavity regularly and prevent impurities from remaining inside.